Industry News
In fact, the working principle of the slitter and the slitter is different. In the case of the slitter, the wide material is divided into the desired width through a fixed or rotary knife, while in the case of the slitter, the material is cut into the desired width according to the movement of the cutting knife.
日期：2022-11-22The coating machine extrusion coating is to apply the molten mesh of synthetic resin onto the base material. It is a multi-functional coating technology, which is used for the economic application of various plastics, especially polyethylene, cardboard, corrugated fibreboard, paper, aluminum foil, cellulose, non-woven fabric or plastic film. What are the characteristics of the coating extrusion technology? Today we tell you:
日期：2022-11-221. The overall installation accuracy is low, Solution: If the installation center of each component deviates from the design center line of the whole machine or has an included angle with the design center, the foil strip will be seriously wrinkled, and the installation center must be adjusted.
日期：2022-11-11The coating machine extrusion coating is to apply the molten mesh of synthetic resin onto the base material. It is a multi-functional coating technology, which is used for the economic application of various plastics, especially polyethylene, cardboard, corrugated fibreboard, paper, aluminum foil, cellulose, non-woven fabric or plastic film. What is the function of coating extrusion technology? Today we tell you:
日期：2022-11-11The protective film coater is composed of four systems: master coil conveying system, coating system, heating and drying system, and cooling system. What are their functions? Let's break it down today:
日期：2022-10-26We use normal cutting equipment to correct deviations after problems occur, but for a special type of round knife cutting table, how should its round knife correct deviations? Many people are not very clear about this step. Next, we will teach you how to correct the deviation of the round knife cutting table.
日期：2022-10-26In recent years, China's paper industry and printing and packaging industry have achieved rapid development, facing unprecedented opportunities, but compared with the world's advanced equipment, it also faces enormous challenges. The production capacity of the production equipment is very strong, but our products are basically in the low-end market. The main reason is the limitation of technical conditions. Up to now, a large number of slitters still use magnetic powder brakes to control the winding tension, which limits the running speed of the equipment and wastes energy. Moreover, due to the service life of the magnetic powder itself, the failure rate is high.
日期：2022-10-10Because of the characteristics of the tape slitter, it is widely used in paper making machinery and printing and packaging machinery industry. The operation is very simple. However, several points should be noted during installation. Follow the installation instructions strictly to avoid future use and installation problems. Unnecessary troubles affected production.
日期：2022-10-10The segment machine is a device for cutting. The most important part is the blade. So how does the tension of the barrier be debugged? What are the reasons when there is a problem with the blade? What are the problems? how should I solve this?
日期：2022-09-19What is the development history and coating process of tape coating machines? Let me talk to you today:
日期：2022-09-191. Q: What should I do if there is a beating of the scroll? Solution: Adjust the three -point concentration bearing and contact the scroll at the same time.
日期：2022-09-121. Production process (coating) Painting a layer of acrylics on the BOPP to compress the allergic glue, the production process is called coating, which is quite simple!
日期：2022-09-12
Mobile terminal
Address：No. 151, Daxing Road, Dongping, Dongguan City
URL：www.dadao-zg.com
landline：+86-769-86723139
Fax：+86-769-86736139
After-sales service line：0769-86738139致电总机转808
E-mail：dadaozg2019@163.com
Domestic business：0086-769-86780883
international trade：0086-769-86780883转886/887/882
Consulting